Content :

AAK hydraulic pressure valve has no horn hole. In Ningbo, the hydraulic valve production base, few factories are sure to solve the horn hole. AAK uses automatic programming software to program and upgrade the processing technology of hydraulic valve cavity hole. The geometric tolerance of each hole is within 0.02mm. At the same time, small fillet is used to replace the R angle of our peers to transition, which completely avoids the horn hole.

Most hydraulic valve manufacturers use manual programming to design the geometric tolerance of cavity hole, which is prone to human error and can not be corrected.

Adair, a hydraulic valve purchaser in Scotland, had many contacts with AAK hydraulic valve before, because he pursues low price, there is no cooperation between us. In July this year, he placed an order for hydraulic pressure valve worth 80,000 US dollars to a hydraulic valve manufacturer in Ningbo.

When we received Adair's email, we understood the problems and causes of his hydraulic pressure valve. After we took the video and sent it to him.

AAK hydraulic valve is good at finding the pain points of traditional process, and is more willing to take time to improve or innovate the production process of hydraulic valve. Many times, the process has been one step ahead of the peers. For example, this hydraulic pressure valve is programmed by automatic programming software, which replaces the manual programming commonly used by our peers. After the hydraulic pressure valve automatically generates the cavity hole, then next step is processed. The geometric tolerance of each hole must be controlled within 0.02mm. If it does not meet the standard, the next step of processing will not be carried out. At the same time, each transition angle between the small holes of the hydraulic pressure valve uses a small fillet to replace the common R angle of our peers.